Cabycal will supply a cataphoresis line to Proesa in Mexico

The Mexican company chooses Cabycal to design a new cataphoresis line for the painting of automotive components of the Magna Internacional group

Valencia, October 5th 2016.- Cabycal will design, manufacture and install a continuous cataphoresis line for the Mexican company Proesa, belonging to the Protexa Group. This facility will paint automotive components for the Magna Internacional group at its facilities in San Luis Potosí (Mexico).

The facility will have 8 painting and cataphoresis areas and an automatic parts handling and transport system, as well as remote assistance. The pre-treatment process (TTS) will be prepared to meet the highest level of demand demanded by the automotive sector in relation to the exterior and interior treatment of metal parts. The facility will come into operation in May 2017.

Cabycal had previously supplied Proesa with a similar cataphoresis line for its plant located in Ramos Arizpe (Mexico). This facility, inaugurated in December 2015 and currently fully operational, is also intended for the pre-treatment and coating of components for the automotive industry.

Proesa, Procesos Electroforéticos S.A. de C.V. is a 100% Mexican company belonging to the industries division of Grupo Protexa. They currently have plants in Ramos Arizpe and San Luis Potosí (Mexico) with electrophoresis, powder and liquid painting lines focused on the automotive, electrical appliances and electronics industries.

Cabycal participates in the Go Global Internationalization Congress

The Valencian company, with a turnover abroad of 90% in 2015, will explain its export experience in the American continent

Valencia, June 29th 2016.- Cabycal participates today in the Go Global Internationalization Congress by the hand of AECTA, Association of Advanced Tertiary Consulting Companies of the Valencian Community. The Valencian company will intervene at 3:30 p.m. in the speech Service companies in the USA: experiences and perspectives, where it will explain its export experience around the world, specifically in the USA and Mexico, where the company has recently opened a commercial office.

Foreign markets have been extremely important for the development of Cabycal, representing 51% and 55% of the company's sales in 2013 and 2014 respectively and reaching 90% of the turnover in 2015. Cabycal exported for the first time to Brazil in 2001. That first international project was followed by others in countries and markets as different as the USA, China, Mexico, England, France, Poland, Turkey, India and Morocco, among others.

For this reason, Cabycal was awarded the Award for Foreign Projection of the Valencian Metallurgical Business Federation (FEMEVAL) in the XIV edition of these awards held last November.

The first edition of the Go Global Congress will feature more than 50 conferences on internationalization with top-level speakers and experiences in globalization of companies in the Community. The congress is organized by IVACE International, ICEX Spain, Export and Investments and the Chambers of Commerce of the Valencian Community.

Cabycal participates for the fifth consecutive year in COATech

The Valencian firm exhibited the presentation Achieving productive excellence in e-coat lines with great success in attendance

Valencia, May 9th 2016.- Cabycal has participated as an exhibitor for the fifth consecutive year at COATech, a show that is part of FABTECH, the most important exhibition of the metalworking industry in Mexico. In this edition, held from May 4 to 6 in Mexico City, the Valencian company had a space of 18 m2, in which it received the main professionals in the sector.

This year the main novelty that the firm has transferred to the visits received has been the recent opening of the Cabycal Coating Technology subsidiary whose offices are located in Mexico City.

In addition, Cabycal participated with great success of attendance in the COATech 2016 commercial presentations panel with the presentation Achieving productive excellence in e-coat lines. During the presentation, Gianpiero Fontana, Director of Engineering, detailed before the attendees a description of different systems that help the user of e-coat installations to maximize their productivity and efficiency.

COATech is part of FABTECH México, an event organized for 14 years whose headquarters alternate each year between Monterrey and Mexico City. FABTECH adds among its four pavilions (Fabtech, Weldemex, Metalform and COATech) 28,750 m2 of exhibition, 600 exhibiting companies and more than 13,000 annual visitors.

Cabycal opens its first delegation outside of Spain

The offices of the new subsidiary, located in Mexico City, will cover the American market

Valencia, January 15th 2016.- Cabycal continues its internationalization process and within it has just opened its first delegation outside of Spain. The offices of the new branch, located in Mexico City, are intended to support the NAFTA market, mainly Mexico and the United States, where Cabycal has delivered a total of five facilities to date.

The opening of this delegation has been driven by the interest and growing demand for surface painting facilities that Cabycal has received from Mexico since 2010. This situation has prompted the company to assess the need to have its own structure in the country North American.

According to Emilio Ferrando, General Director of Cabycal "Our engineering department designs facilities adapted not only to the productive needs of each client, but also to the regulations and technical standards of each country". "This fact", adds Emilio Ferrando, "supposes a competitive advantage in countries of the American continent, that look for the European standard of quality, but adapted to their technical and production needs".

Cabycal receives the FEMEVAL award for Foreign Projection

This award is a recognition of the work and results of the Valencian company in the international arena

Valencia, November 20th 2015.-Cabycal has been awarded the Award for Foreign Projection of the Valencian Metallurgical Business Federation (FEMEVAL) in the XIV edition of these awards. The award has been collected by the Director General of Cabycal, Emilio Ferrando, from the hands of the President of the Council of Chambers of the Valencian Community, José Vicente Morata.

This award is a recognition of the exporting work of the Valencian company that calculates that 90% of its turnover in 2015 is for sales made outside our country. Cabycal first exported to Brazil in 2001. This first international project was followed by many others in countries and markets as different as the US, China, Mexico, England, France, Poland, Turkey, India and Morocco, among others.

In recent years, Cabycal has bet heavily on the foreign market. As a result of the increase in projects in the American continent, the Valencian company will soon open a commercial office in Mexico.

The delivery ceremony of the XIV edition of the FEMEVAL Awards took place yesterday in the organisation's assembly hall and brought together authorities, such as the President of the Generalitat Valenciana, Ximo Puig, businessmen, unions and journalists to analyze and reward the initiative business in the metal sector.

Cabycal will participate in the construction of the next factory to be opened by Gestamp in the United States

Valencia, July 22nd 2015.- Cabycal has been chosen by the multinational company Gestamp to design, develop and produce the cataphoresis line that will paint frames and other structural components for the new Volkswagen SUV in Chattanooga (Tennessee).

Cabycal's plant will consist of a 17-station pre-treatment and cataphoresis system and an automated handling and transportation system supplied by P&F. This line, designed to paint a wide range of metal parts as well as the critical surfaces of steel car components, will be put into operation at the end of April 2016.

Cabycal has already supplied Gestamp with a similar pre-treatment and cataphoresis system for its plant in Zaragoza. The success of this first project consolidated the relationship of the two Spanish companies, which are currently working on another project in Poland.

The Volkswagen Chattanooga plant, on the other hand, started production in 2011 and is currently devoted to the construction of the new Passat saloon, designed for the North American market. In July 2014, however, it was announced that it will produce a new midsize sport utility vehicle.

Cabycal celebrates its 30th anniversary in full international expansion

The Valencian company, which began in 1985, reviews the achievements of its 30 years of operation

Valencia, December 15, 2015.- Cabycal commemorates this year the 30th anniversary of its creation. In the beginning, this small family business was dedicated to the production and assembly of cabins and heating systems, products that gave the company its name.

It was in 1990 when Cabycal began supplying paint booths to the furniture industry, one of the most prosperous sectors in Valencia in those years. Since 1996, the company focused its evolution in the industrial sector, more specifically in the automotive sector, and in 2001 it began its international journey with the implementation of the largest automatic top coat line in Brazil.

Cabycal's commitment to quality was recognized in 2006 with the obtaining of ISO 9001 certification. Cabycal has always been concerned with reducing the impact on the environment of its facilities. For this reason, in 2008 it implemented the first project with a Recuperative Thermal Oxidizer (RTO) for the treatment of Volatile Organic Compounds (VOCs).

Since 2010, the main international firms in the automotive sector (TIER 1) have chosen Cabycal on numerous occasions as a partner for the treatment and painting of their parts. This has been possible thanks to the development of an internationalization strategy.

As a result of the successes obtained outside of our country, Cabycal has been awarded in the year of its 30th anniversary with the Award for Foreign Projection of the Valencian Metallurgical Business Federation (FEMEVAL).

The Valencian firm enthusiastically renews its commitment to quality with its clients and will continue to bet on the internationalization of its activity in the coming years.